Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual page 67

Hide thumbs Also See for PRIMERGY RX300 S8:

Table of Contents

Figure 11: Mounting the server onto the rack rails

Ê Fully extend the telescopic rails until they lock in place (1).

Ê At a slight angle, lower the server onto the rear mounting point on the

telescopic rails (2).

Ê Fold down the server (3). Ensure that all six rack mounting bolts are properly

seated in the mounting points on the telescopic rails and that the locking

bars engage (4).

Upgrade and Maintenance Manual

Basic hardware procedures