Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual page 440

System board and components
Ê Inform the customer about changed WWN and MAC addresses. For further
information, refer to section
on page 96.
Ê After replacing the system board in a server running Linux OS,
NIC configuration file in a Linux environment" on page 93
"Enabling SVOM boot watchdog functionality" on page 89
Ê
"Enabling BitLocker functionality" on page 95
Ê
Ê Reconfigure your network settings in the operation system according to the
original configuration of the replaced controller (expansion card or onboard).
I
Configuration of network settings should be performed by the
customer.
For further information, please refer to section
settings recovery" on page
Ê If applicable, "After replacing the system board" on page
440
"Looking up changed MAC / WWN addresses"
432.
Upgrade and Maintenance Manual
"Updating the
"Note on network
99.
RX300 S8