Handling Sfp+ Transceiver Modules; Installing Sfp+ Transceiver Modules - Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual

Expansion cards and backup units
"Switching on the server" on page 71
Ê
Ê If applicable, "Updating RAID controller firmware" on page
"Enabling SVOM boot watchdog functionality" on page 89
Ê
9.7

Handling SFP+ transceiver modules

For Fiber Channel over Ethernet (FCoE) configurations, the Ethernet server
adapter is equipped with one or two SFP+ (small form-factor pluggable)
transceiver modules.
9.7.1

Installing SFP+ transceiver modules

Upgrade and Repair Unit
(URU)
Tool: tool-less
Preparing the SFP+ transceiver module
Figure 122: Removing the protective optical port plug
234 Upgrade and Maintenance Manual
84.
Hardware: 5 minutes
RX300 S8