Concluding Steps; Replacing The 12X 2.5-Inch Hdd Sas Backplane; Preliminary Steps - Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual

I
For a complete cabling overview, please refer to section
cables" on page
7.4.2.6

Concluding steps

"Installing the fan box" on page 164
Ê
"Installing the front cover" on page 446
Ê
"Reassembling" on page 63
Ê
"Installing 2.5-inch HDD / SSD modules" on page 135
Ê
"Connecting the server to the power source" on page 69
Ê
"Switching on the server" on page 71
Ê
"Enabling BitLocker functionality" on page 95
Ê
7.4.3

Replacing the 12x 2.5-inch HDD SAS backplane

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
7.4.3.1

Preliminary steps

I
The 2.5-inch HDD SAS backplane is mounted on the drive cages. It is
not necessary to remove the drive cage before replacing the SAS / SATA
backplane
"Locating the defective server" on page 51
Ê
"Disabling BitLocker functionality" on page 73
Ê
"Shutting down the server" on page 54
Ê
"Disconnecting power cords" on page 54
Ê
Ê Remove all HDD / SSD modules from the server as described in section
"Removing 2.5-inch HDD / SSD modules" on page
RX300 S8
465.
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
Hardware: 10 minutes
138.
"List of used
153