14.3.2.1 Preliminary steps
"Disabling BitLocker functionality" on page 73
Ê
"Locating the defective server" on page 51
Ê
"Shutting down the server" on page 54
Ê
"Disconnecting power cords" on page 54
Ê
"Getting access to the component" on page 57
Ê
14.3.2.2 Removing the UFM
Figure 268: Removing the UFM (A)
Ê Remove the nylon screw on the defective UFM (1).
Ê Disconnect and remove the defective UFM (2).
RX300 S8
Upgrade and Maintenance Manual
System board and components
407