Preliminary Steps; Removing The Odd Dummy Module - Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual

12.5.1 Preliminary steps

"Disabling BitLocker functionality" on page 73
Ê
"Shutting down the server" on page 54
Ê
"Disconnecting power cords" on page 54
Ê
"Getting access to the component" on page 57
Ê
"Removing the fan box" on page 162
Ê

12.5.2 Removing the ODD dummy module

Figure 177: Removing the ODD dummy module
Ê Pull the locking latch upward to unlock the ODD dummy module.
V
CAUTION!
Save the ODD dummy module for future use.
Always replace dummy modules into unused drive bays to comply with
applicable EMC regulations and satisfy cooling requirements.
RX300 S8
Upgrade and Maintenance Manual
Accessible drives
307