Installing The Tape/Rdx Drive - Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY RX300 S8:

Table of Contents

Accessible drives

Figure 188: Fastening the tape/RDX drive in the drive cage

Ê Fasten the tape/RDX drive with 4 screws in the drive cage

12.8.3 Installing the tape/RDX drive

Figure 189: Connecting the cables to the tape/RDX drive

Ê Route the power cable through the bay.

Ê Connect the power adapter cable C16 to the power cable C5 (1).

Ê Connect the power adapter cable C16 to the tape/RDX drive (2).

Ê Connect the USB cable C17 to the tape/RDX drive or USB cable C21 to the

RDX drive (3).

Upgrade and Maintenance Manual