Replacing The Cmos Battery; Preliminary Steps - Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY RX300 S8:
Table of Contents

Advertisement

System board and components
14.2

Replacing the CMOS battery

Upgrade and Repair Unit
(URU)
Tools: tool-less; recommended: tooth pick
Safety notes
V
CAUTION!
The CMOS battery must be replaced with an identical battery or with
a battery type recommended by the manufacturer.
Keep lithium batteries away from children.
Do not throw batteries into the trash can. Lithium batteries must be
disposed of in accordance with local regulations concerning special
waste.
For further safety information, please refer to section "Environmental
protection" in the operating manual of your server.
Ensure to insert the CMOS battery with the positive pole facing
up!

14.2.1 Preliminary steps

"Locating the defective server" on page 51
Ê
"Shutting down the server" on page 54
Ê
"Disconnecting power cords" on page 54
Ê
"Getting access to the component" on page 57
Ê
400
Upgrade and Maintenance Manual
Hardware: 5 minutes
RX300 S8

Advertisement

Table of Contents
loading

Table of Contents