Advertisement
Using the Built-In Help System
To access the built-in help system of the product, first press the Utility key, then
press Page 1/2 and Help. Use the Adjust knob to choose the help item you want,
and finally press Select to obtain help.
The help listings are as follows:
1. System information
2. Generating a standard waveform
3. Generating an arbitrary waveform
4. Generating a modulated waveform
5. Sweep function
6. Burst function
7. Store/Recall
8. Synchronizing multiple instruments
9. Restoring factory settings
10. Technical support
Introduction to EasyWaveX
The T3AFG30 and T3AFG60 series includes arbitrary waveform editing software
called EasyWaveX. This software is a platform for easily creating, editing, and
transferring waveforms to the generator. It provides 11 standard waveforms such as
Sine, Square, Ramp, Pulse, Noise and DC, which meets most engineers' basic
needs. In addition, it provides several ways of manual drawing, point-to-point line
drawing and arbitrary point drawing. EasyWaveX allows for fast and easy creation of
complex waveforms. The main interface of EasyWaveX is shown in the following
figure:
13
Advertisement
