Using Front Panel Keys; Direct Execution Keys; Toggle Keys; Selection Keys - Agilent Technologies 4349B Manual

4349B

Using Front Panel Keys

The 4349B has four type of keys as follows:

Direct Execution Keys

Toggle Keys

Selection Keys

Value Setup Keys
This section tells how to operate the 4349B using its front-panel keys.
Note
If you want to exit an operation and go back to the measurement display, press
Direct Execution Keys
Pressing a direct execution key will perform the pressed key's function immediately. For
example,
Press . The 4349B will begin the OPEN correction immediately.
Toggle Keys
Pressing a toggle key will switch between several conditions. An annunciator(
the current condition. For example,
Press . The Meas Time annunciator(
Selection Keys
Pressing a selection key will display the selection display. The blinking item is the one
currently selected. By using
changed.
For example, to perform self test,
1. Press .
2. Press to select
3. Press . The self test will start immediately. After the test is nished, the 4349B
displays any existing error code, and returns to the menu.
4. Press to
several times.
, or the selection key itself, the item selected can be
is blinking.
.
the menu.
) points to 10 ms, 30 ms, 100 ms, or 400 ms.
9
) will indicate
9
Getting Started 1-13