Table 1-1 Xscf-Lan Operation Examples; Table 1-2 Xscf-Lan Operation Examples; Table 1-3 Xscf-Lan Operation Examples - Fujitsu SPARC Enterprise M4000 User Manual

TABLE 1-1
LAN Name
XSCF-LAN0 port
XSCF-LAN1 port
TABLE 1-2
LAN Name
XSCF-LAN0 port
XSCF-LAN1 port
Note – The serial port is used by maintenance engineers.
TABLE 1-3
LAN Name
XSCF-LAN0 port
XSCF-LAN1 port
Caution – IMPORTANT - The IP address of XSCF-LAN#0 and the IP address of
XSCF-LAN#1 must be specified in different subnet addresses.
Note – The two XSCF-LAN ports are used for the same purpose (alternate path
configuration). For details on these connections, see
1-14 SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
XSCF-LAN Operation Examples 1
Operation
• For system administrator operation
The system administrator can control the server, control
domains, and display the console using the XSCF Shell.
• For field engineer operation
Field engineers can configure the server and perform
maintenance tasks using the XSCF Shell.
• For remote maintenance service operation
XSCF-LAN Operation Examples 2
Operation
• For system administrator operation
• For remote maintenance service operation
Not used
XSCF-LAN Operation Examples 3
Operation
• For system administrator operation
• For maintenance operation
• For remote maintenance service operation
Same as above
Chapter 3.