Examples Of Svp Operation; Selecting Iorsf - Fujitsu BS2000 SE Series Operating Manual

Operating the service processor

4.5 Examples of SVP operation

4.5.1 Selecting IORSF

The steps described below are required to load a specific IORSF the next time IMPL takes
place or the next time the system is switched on.
IORSF with Level 2 is selected in the example below.
Requirement
You are logged in to the SE Manager and have opened the SVP console.
i
The MODE SELECTION FRAME is displayed on the screen:
FUNCTION=>
- EXECUTION -
*1 CPU STOP
*2 INTERRUPT
*3 TOD ENABLE
*4 SYSTEM RESET
*5 SYSTEM RESET CLEAR
*6 STORE STATUS
*7 RESTART
RA
Figure 25: MODE SELECTION FRAME screen
U41859-J-Z126-2-76
An operator account has access to the SVP console when the individual right
permits SVP access.
----- MODE SELECTION FRAME -----
CL-0
- SELECTION -
*LD PROGRAM LOAD
*ST STATUS DISPLAY
*MA MANUAL OPERATION
*AD ALTER/DISPLAY
*ME MESSAGE
*CH CH/SUBCH STATUS
*AU AUXILIARY
*MF MSF
*PA PERFORMANCE ANALYZER
CPU-0 CHP-0 RUN
Examples of SVP operation
E90L01G
CPU SELECT=>
- 0 1 2 3 4 -
- -
STOP/START MODE=>
*1 ALL CPU
>2 TARGET CPU
[]-[]00
55