Using The Showlogs Command To Display Other Logs; Monitoring Log; B.4.1 Monitoring Log; Temperature And Humidity History Log - Fujitsu SPARC Enterprise M4000 User Manual

B.4 Using the showlogs Command to
Display Other Logs
This section explains how to reference the other main logs by using showlogs (8)
command. For details of each log option of showlogs (8), see the XSCF Reference
Manual or the main page. See
log.
B.4.1

Monitoring Log

Using the showlogs (8) Command to Reference Monitoring Logs
An event that occurred in the server is displayed as a monitoring message in real
time for the user who logged in the XSCF. The XSCF firmware collects this message
in a monitoring message log. Specify the monitor option on the XSCF Shell and
perform the showlogs (8) command to reference the monitoring log. The following
items are displayed:
Time at which the monitoring message was collected (Date). This is indicated in
■
local time.
Monitoring message (Message).
■
B.4.2

Temperature and Humidity History Log

Using the showlogs (8) Command to Reference Temperature and
Humidity History Logs
The XSCF firmware collects the environment and temperature and humidity history
regarding the server in a temperature and humidity log. The temperature and
humidity history log is displayed at ten-minute intervals. Specify the env option on
the XSCF Shell and perform the showlogs (8) command to reference temperature
and humidity history logs. The following items are displayed:
Time at which each thermal log was collected (Date). This is indicated in local
■
time.
Temperature (Temperature)
■
Humidity (Humidity). The humidity is not displayed in a midrange system.
■
B-8 SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
for the size and generation number of each
TABLE 8-3