Fujitsu SPARC Enterprise M4000 User Manual page 179

2. Use the setdomainmode (8) command to specify host watchdog and break
signal suppression.
<Example> Enable Host watchdog and Break signal suppression for domain ID 0.
XSCF> setdomainmode -d 0 -m secure=on
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
The specified modes will be changed.
Continue? [y|n]:y
configured.
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
3. Use the showdomainmode (8) command to confirm the secure mode is on.
:max -> -
:off -> on
:on -> -
:auto -> -
:max
:on (host watchdog: available
:on (autoboot:on)
:auto
Break-signal:non-receive)
Chapter 2 Setting Up XSCF 2-123