Event Log; B.3 Event Log - Fujitsu SPARC Enterprise M4000 User Manual

Switch status
Locked:
Service:
B.3

Event Log

When an event occurs in the server, such as when the system status changes, the
configuration is changed, the operator panel operated, or an event was sent to the
OS in the server or domain, the XSCF firmware collects an XSCF event log. The field
engineer and authorized service personnel use the XSCF event logs to analyze a fault
that occurs, investigate the server operation status, or reference the history of
maintenance operation. This section explains how to reference XSCF event logs. See
TABLE 8-3
Using the showlogs (8) Command to Reference XSCF Event Logs
●
Specify the event option on the XSCF Shell and perform the showlogs (8)
command to reference XSCF event logs.
<Example>
XSCF> showlogs event
Date
Mar 30 17:45:31 JST 2005
Mar 30 17:55:31 JST 2005
(The example is subject to change without previous notice for functional
improvement.)
In the example above, the following items are displayed:
Time at which each event log was gathered (Date). This is indicated in local time.
■
Event message (Message).
■
Meaning
The mode switch is locked.
The mode switch is in service.
for the size and generation numbers of XSCF event logs.
XSCF event logs are displayed as a list.
Message
System power on
System power off
Appendix B XSCF Log Information B-7