Fujitsu SPARC Enterprise M4000 User Manual page 157

Domain Configuration (Continued)
TABLE 2-24
Item Description
Delete from Deletes an XSB from a domain.
domain
Specify the following:
• Number of the deleted XSB
• unassign
Specify one of the following states after
deletion when the domain is running (the
DR operation):
• disconnect (deletion (assigned state))
• unassign (complete deletion (pool state))
• reserve (reserve deletion)
Move to Moves an XSB from its current domain to
domain another domain.
After the XSB is deleted from its domain, the
function adds or assigns it to the other
domain.
Specify the following:
• Domain ID and XSB number of the move
destination
• assign
Specify one of the following
movement/integration states when the
domain is running (the DR function):
• configure (OS connection request)
• assign (assign the XSB to the move
destination (reserve))
• reserve (reserve movement)
Note – For details on using DR functions, see the Dynamic Reconfiguration User's
Guide.
Shell command Remarks
• The XSB is placed in
deleteboard
• If the XSB is placed in
(These are the DR
functions.)
• If the XSB is placed in
moveboard
• If the XSB is placed in
(These are the DR
functions; see Note.)
Chapter 2
the assigned (assign
(reserve)) state when
"disconnect" is
performed. At this
state, a reboot of the
domain or the
addboard (8)
command would add
the XSB again.
the reserve (reserve
deletion) state,
turning off power to
the domain places it
in the pool state.
the assign (assign
(reserve)) state, a
reboot or the
addboard (8)
command with
"configure" specified
at the domain of the
move destination
would add the XSB.
the reserve (reserve
movement) state,
turning off power to
the domain places it
in the pool state.
Turning on power to
the move destination
adds the XSB.
Setting Up XSCF 2-101