Fujitsu SPARC Enterprise M4000 User Manual page 282

b. Use the getflashimage (8) command to specify the firmware program
<Example> Login a remote ftp server specifying the user name and
host name that requires authentication password, then, import the
new 1040 version firmware program (tar.gz).
XSCF> getflashimage -u yyyyy ftp://imgserver/img/FFXCP1020.tar.gz
Existing versions:
Warning: About to delete old versions.
Continue? [y|n]: y
Password: [not echoed]
Removing FFXCP1010.tar.gz.
0MB received
1MB received
2MB received
...
43MB received
44MB received
45MB received
Download successful: 46827KB at 1016.857KB/s
MD5: 683fb5240e4937948dd6ad83b4a99669
c. If complete message is displayed, the XCP import has ended.
Note – After importing, if "Error: File is invalid or corrupt" message is displayed, it
means the XCP file that imported is not a correct file. There is a possibility of either
obtaining an illegal XCP file or that the XCP file was falsified by unauthorized access
after the customer downloaded the XCP file.
3. Perform the firmware update.
(The XSCF firmware is downloaded and applied, and the OpenBoot PROM
firmware is downloaded.)
a. Use the version (8) command to display the current firmware version.
8-12 SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
(tar.gz) file and import XCP to the system.
(The update is not performed at this point.)
Version
FFXCP1010.tar.gz
Size Date
46827123 Wed Mar 14 19:11:40 2007