Setting The Memory Mirror Mode For A Psb - Fujitsu SPARC Enterprise M4000 User Manual

Setting the Memory Mirror Mode for a PSB

Command operation
■
1. Use the showfru (8) command to display PSB memory mirror mode
information.
XSCF> showfru –a sb
Device Location
sb 00
sb 01
sb 02
2. Use the setupfru (8) command to enable memory mirror mode on a PSB.
<Example> Enable Memory Mirror mode on PSB#00.
XSCF> setupfru –m y sb 00
3. Use the showfru (8) command to confirm the setting of memory mirror mode.
XSCF> showfru –a sb
Device Location
sb 00
sb 01
sb 02
XSB Mode Memory Mirror Mode
Quad No
Uni No
Uni No
XSB Mode Memory Mirror Mode
Quad Yes
Uni No
Uni No
Chapter 2 Setting Up XSCF 2-115