Fujitsu SPARC Enterprise M4000 User Manual page 165

2. Use the showboards (8) command to display XSB status information.
XSCF> showboards –va
XSB R DID(LSB) Assignment
---- - -------- ----------- ---- ---- ---- ------- -------- ----
00-0 02(00) Assigned
01-0 02(07) Assigned
01-1 02(08) Assigned
01-2 02(09) Assigned
01-3 02(10) Assigned
3. Use the poweroff (8) command to power off domain ID 2.
XSCF> poweroff –d 2
DomainIDs to power off:02
Continue? [y|n] :y
02 :Powering off
*Note*
This command only issues the instruction to power-off.
The result of the instruction can be checked by the
"showlogs power".
4. Use the showboards (8) command to display XSB status information.
XSCF> showboards –va
XSB R DID(LSB) Assignment
---- - -------- ----------- ---- ---- ---- ------- -------- ----
00-0 02(00) Assigned
01-0 02(07) Assigned
01-1 02(08) Assigned
01-2 02(09) Assigned
01-3 02(10) Assigned
5. Use the deleteboard (8) command to delete an XSB.
<Example> Delete XSBs and make XSBs pool state.
XSCF> deleteboard -c unassign 1-1
XSB#01-1 will be unassigned from domain immediately.
Continue?[y|n] :y
XSCF>
Pwr Conn Conf Test
y y y Passed
y y y Passed
y y y Passed
y y y Passed
y y y Passed
Pwr Conn Conf Test
n n n Passed
n n n Passed
n n n Passed
n n n Passed
n n n Passed
Fault COD
Normal n
Normal n
Normal n
Normal n
Normal n
Fault COD
Normal n
Normal n
Normal n
Normal n
Normal n
Chapter 2 Setting Up XSCF 2-109