9.2.1
Prerequisites
Some settings are disabled in the initial settings of the XSCF Web. To use this
function, advance configuration is required as follows:
Create an XSCF user account.
■
Set the IP address of a client terminal.
■
Enable https at the https setting to use the XSCF Web.
■
Register the web server certificate at the https setting.
■
Specify mail notification (recommended for failure notification).
■
For details on the settings, see
9.2.2
Supported Browsers
TABLE 9-2
any of the following web browsers, enable the appropriate settings.
TABLE 9-2
Browser
Netscape Navigator (TM)
Microsoft (R) Internet Explorer
Firefox (Solaris 10)
9.2.3
Functions to be Enabled on the Browser
The following functions are necessary for the browser.
1. Secure Socket Layer Protocol (SSL) Ver. 3,
Transport Layer Security (TLS) Ver. 1
2. JavaScript™ enabled
3. Cookies enabled for session management
9-6
SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
lists the web browsers supported by the XSCF Web. To use functions in
Supported Browsers
Chapter
2.
Version
7.1 and later
6.0 and later
2.0 and later