Domain Reset - Fujitsu SPARC Enterprise M4000 User Manual

4.4.6

Domain Reset

■
1. Use the showdomainstatus (8) command to check the power status of the
domain.
XSCF> showdomainstatus -a
DID
00
01
02
03
2. Use the reset (8) command to issue a reset instruction to the specified
domain.
<Example 1>
XSCF> reset -d 0 por
DomainID to reset:00
Continue? [y|n] :y
00 :Reset
*Note*
This command only issues the instruction to reset.
The result of the instruction can be checked by the
"showlogs power".
<Example 2>
XSCF> reset -d 0 xir
DomainID to reset:00
Continue? [y|n] :y
00 :Reset
*Note*
This command only issues the instruction to reset.
The result of the instruction can be checked by the
"showlogs power".
Command operation
Domain Status
Running
Running
Running
Running
Issue a domain ID 0 reset instruction.
Issue an XIR reset instruction.
Chapter 4 Operation of the Server 4-15