Fujitsu SPARC Enterprise M4000 User Manual page 236

Displaying and Setting the Locator LED State of Each Specified
Component in an External I/O Expansion Unit
■
●
Use the ioxadm (8) command to display or set the locator LED state of the
specified component.
<Example 1>
Expansion Unit and components.
XSCF> ioxadm locator iox@12B4
Location
IOX@12B4
IOX@12B4/PS0
<Example 2>
XSCF> ioxadm locator on iox@12B4/ps0
Location
IOX@12B4
IOX@12B4/PS0
Turning On or Off Power to an I/O Board or PSU
■
●
Use the ioxadm (8) command to display, turn on or off power to the specified
component.
<Example 1> Display the PSU states of an External I/O Expansion Unit and
components.
XSCF> ioxadm -v list IOX@12B4
Location
IOX@12B4
IOX@12B4/PS0
IOX@12B4/PS1
IOX@12B4/IOB0
IOX@12B4/IOB0/LINK
<Example 2> Turn off power to I/O board 0.
XSCF> ioxadm poweroff iox@12B4/iob0
<Example 3> Turn on power to I/O board 0 again.
XSCF> ioxadm poweron iox@12B4/iob0
4-28 SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
Command operation
Display the locator LED states of an External I/O
Sensor
LOCATE
SERVICE Fast
Set the locator LED state of PSU0 to on.
Sensor
LOCATE
SERVICE On
Command operation
Type
IOX
A195
A195
PCIX
OP
Value Res
Fast -
-
Value Res
Fast -
-
FW Ver Serial Num
1.0 XCX033
- T01056
- T01074
- XX00A3
1.3 XF00X8
Units
LED
LED
Units
LED
LED
Part Num State
5016937-03 On
3001701-03 On
3001701-03 On
5016938-04 On
5017040-03 On