Fujitsu SPARC Enterprise M4000 User Manual page 235

Note – (2) A locator LED that indicates a location. The names of locator LEDs
depend on the corresponding components. For the External I/O Expansion Unit and
LED types and the descriptions of components contained in an External I/O
Expansion Unit, see the External I/O Expansion Unit Installation and Service Manual for
your server.
Displaying a List of External I/O Expansion Units, I/O Boards, Link
Cards, and PSUs or Displaying Their Environment Information
Command operation
■
●
Use the ioxadm (8) command to display a list of External I/O Expansion Units
and downlink card paths and to display information for each component.
<Example 1> Display a list of External I/O Expansion Units and
downlink cards
XSCF> ioxadm list
IOX
IOX@5309
IOX@A3B5
-
<Example 2> Display a list of External I/O Expansion Units, I/O
ports, link cards, and PSUs
XSCF> ioxadm -v list IOU#1-PCI#1
Location Type
IOX@A3B5 IOX
IOX@A3B5/PS0 A195
:
<Example 3> Display environment information based on sensor
measurements
XSCF> ioxadm env -te IOX@A3B5
Location Sensor
IOX@A3B5/PS0 T_AMBIENT
IOX@A3B5/PS0 V_ISHARE
IOX@A3B5/PS0 I_DC
IOX@A3B5/PS0 S_FAN_SET
:
Link 0 Link 1
IOU#2-PCI#2 IOU#3-PCI#1
- IOU#1-PCI#1
- IOU#2-PCI#1
FW Ver
1.4
-
Value
28.000
0.632
2.316
4500.000
Serial Num Part Num
CP0001 5016937-01
PS0001 3001701-02
Res Units
1.000 C
0.040 V
0.289 A
300.000 RPM
Chapter 4 Operation of the Server
State
On
On
4-27