Fujitsu SPARC Enterprise M4000 User Manual page 21

Preface
This manual describes the system monitor and control facility (eXtended System
Control Facility, or XSCF, hereafter) used to control, monitor, operate, and service
SPARC Enterprise series servers and domains. XSCF may also be referred to as the
System Control Facility (SCF). Unless otherwise stated in this manual, the SPARC
Enterprise system is described as"the server" or "the system".
Before reading this manual, it is necessary to have read the SPARC Enterprise
M8000/M9000 Servers Overview Guide and the SPARC Enterprise M4000/M5000 Servers
Overview Guide, and the SPARC Enterprise M4000/M5000/M8000/M9000 Servers
Administration Guide.
In addition, be sure to also read the SPARC Enterprise M4000/M5000/M8000/M9000
Servers XSCF Reference Manual and other manuals referenced in this manual.
This section includes:
"Audience" on page xx
■
"Glossary" on page xx
■
"Structure and Contents of this Manual" on page xx
■
"SPARC Enterprise Mx000 Servers Documentation" on page xxii
■
"Abbreviated References to Other Documents" on page xxv
■
"Models" on page xxvi
■
"Text Conventions" on page xxvi
■
"Prompt Notations" on page xxvii
■
"Syntax of the Command Line Interface (CLI)" on page xxvii
■
"Conventions for Important Messages" on page xxviii
■
"Software License" on page xxviii
■
"Limitations and Notes" on page xxviii
■
"Fujitsu Welcomes Your Comments" on page xxix
■
Preface xix