Ldap Administration - Fujitsu SPARC Enterprise M4000 User Manual

2. Use the setpasswordpolicy (8) command to specify a password policy.
<Example> Specify 3 for the retry count, an eight-character
password containing at least two digits, 60 days for the expiration
period, and 15 days for the advance notice of expiration.
XSCF> setpasswordpolicy -y 3 -m 8 -d 2 -u 0 -l 0 -o 0 -M 60 -w 15
3. Use the showpasswordpolicy (8) command to confirm the settings.
XSCF> showpasswordpolicy
Mindays:
Maxdays:
Warn:
Inactive: -1
Expiry:
Retry:
Difok:
Minlen:
Dcredit:
Ucredit:
Lcredit:
Ocredit:
Remember: 3
2.2.3

LDAP Administration

LDAP administration is used to specify items relating to LDAP clients. The LDAP
server, bind ID, password, baseDN and so on are set. In the LDAP server, the XSCF
user information is managed.
Note – This section does not cover LDAP configuration and administration. An
administrator who is familiar with LDAP should perform the LDAP design. For
details on adding user information to an account on an LDAP server, see the
Administration Guide.
TABLE 2-5
0
60
15
0
3
1
8
2
0
0
0
lists terms used in LDAP Administration.
Chapter 2 Setting Up XSCF 2-35