Mail Administration (Continued)
TABLE 2-18
Item
Description
Display mail
Displays mail report function setting
settings
information.
Enable/
Enables or disables the mail report
Disable
function.
Recipient
Sets the recipient address for a mail
address
message to be sent to the system
administrator.
Specifying the Host Name, Port Number, and Reply Address of the
SMTP Server
■
1.
Use the showsmtp (8) command to display SMTP server setting information.
XSCF> showsmtp
Mail Server:
Port: 25
Authentication Mechanism: none
Reply address:
2. Use the setsmtp (8) command to set SMTP server setting information.
<Example 1> Specifying a host name, port number, reply address and
SMTP authentication
XSCF> setsmtp -s mailserver=192.1.4.5 -s port=25 -s replyaddress=
yyyy@example.com -s auth=smtp-auth -s usr=usr001 -s password=
xxxxxxxx
<Example 2> Specifying a host name, port number, reply address and
POP authentication
XSCF> setsmtp
Mail Server [192.1.4.2]: 192.1.4.5
Port[25]:
Authentication Mechanism [none]:pop
Reply Address [yyyy@example.com]:
Command operation
POP Server [192.1.4.2]:
User Name []: usr001
Password []: xxxxxxxx
Shell
Command
Remarks
showemailreport
The default setting is
setemailreport
"Disable."
Multiple addresses can be
setemailreport
specified to up to 255
characters, by using a
comma as the delimiter.
Chapter 2
Setting Up XSCF
2-85