Table 3-1 Types Of Terminals Connected With Xscf - Fujitsu SPARC Enterprise M4000 User Manual

Types of Terminals Connected With XSCF
TABLE 3-1
Port Terminal Type
XSCF-LAN port • XSCF Shell terminal
(2 ports per XSCF • You can use the XSCF Shell with SSH or telnet connection.
Unit)
• Either of the two XSCF-LAN ports can be used concurrently by
[10/100 Mbps]
• Switching to the domain console is enabled by the console (8)
After login, if the XSCF Shell is not used for a certain period, the
user is forcibly logged out.
To return to the shell window from the domain console, press the
"#." (sharp and period) keys (default) while holding down the
<Enter> key. For details on changing these default keys, see the
description on the console (8) command.
• Domain console (RW console)
• OS console enabled for input and output. The RW console is
• In one domain, only one user (one connection) at a time can use
The domain console is not forcibly logged out.
(Note 2)
• Domain console (RO console)
• OS console used for display only. The RO console is enabled by
The domain console is not forcibly logged out.
• The XSCF Web can be used by specifying a URL in a browser.
Serial port • XSCF Shell terminal
(One per XSCF Unit) • The XSCF Shell can be used immediately following connection
• As with that of the XSCF-LAN port, a screen transition to the
After login, if the XSCF Shell is not used for a certain period, the
user is forcibly logged out.
• Domain console (RW console)
• This console is similar to that of the XSCF-LAN port.
• Domain console (RO console)
• This console is similar to that of the XSCF-LAN port.
3-4 SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
more than one user. (Note 1)
command.
enabled by specifying a write-enabled console in the console
(8) command from the shell terminal.
the RW console.
specifying a reference-only console in the console (8)
command from the shell terminal.
to a serial port.
domain console is possible.
Port Number, Cable
SSH: 22
telnet: 23
A LAN cable is
required.
https: 443
A LAN cable is
required.
A RS-232C serial
crosscable is
required.
If only a LAN cable
is available, a 9-pin
conversion cable is
required on the PC
side.