Table 9-10 Network Configuration - Fujitsu SPARC Enterprise M4000 User Manual

Setting System
TABLE 9-10
[Network] in the Menu tree.
Network Configuration
TABLE 9-10
Function
XSCF network information and status display
XSCF network configuration and display
Route display and configuration
DNS server display and configuration
Apply network settings
9-16 SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
lists the functions for Network configuration of XSCF. Select [Settings]-
Remarks
Displays the XSCF network information and status.
This function is equivalent to the shownetwork (8)
and showhostname (8) commands.
Sets each IP address, host name, domain name,
netmask, and enabling/disabling of the XSCF
network interface.
This function is equivalent to the setnetwork (8)
and sethostname (8) commands.
The DSCP link address is displayed as the PPP
connection interface. However, the DSCP link
address cannot be set through the XSCF Web. Set
the address by using the setdscp (8) command.
Displays and configures the routing.
This function is equivalent to the showroute (8)
and setroute (8) commands.
Dispalys and configures the nameserver.
This function is equivalent to the
shownameserver (8) and setroute (8)
commands.
Applies the network settings. After saving the
settings, to complete the settings, XSCF reset is
required.
This function is equivalent to the applynetwork
(8) and rebootxscf (8) commands.