Display Server Configuration/Status Information - Fujitsu SPARC Enterprise M4000 User Manual

4.1.2

Display Server Configuration/Status Information

■
●
Use the showhardconf (8) command to check the status of a device.
XSCF> showhardconf
SPARC Enterprise xxxx;
:
The status information of each device is as below.
■
■
■
■
■
■
4-4 SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
Command operation
+ Serial:PP20605005; Operator_Panel_Switch:Locked;
+ Power_Supply_System:Single; SCF-ID:XSCF#0;
+ System_Power:On; System_Phase:Cabinet Power On;
Domain#0 Domain_Status:Powered Off;
MBU_B Status:Normal; Ver:0101h; Serial:7867000282
CPU/Memory board unit / Motherboard unit information
Unit number, status, version, serial number, FRU number, and memory
capacity
CPU module information
Unit number, status, version, serial number, FRU number, CPU operating
frequency, CPU type
Memory information
Unit number, status, version, serial number, FRU number, and information
on each memory slot. In the high-end systems, there is information on
each memory slot.
The displayed information on each memory slot includes the unit number,
status, code, type and memory capacity.
DDC information
Unit number, status
I/O unit information
Unit number, status, version, serial number, FRU number, and information
on each PCI and DDC.
The displayed information on each PCI includes the unit number, name
property, and card type.
The displayed information on each DDC includes the unit number and
status.
External I/O Expansion Unit (IOBOX) information
Unit number, serial number and information on each I/O boat and PSU in
an I/O expansion unit (see Note).
;