Fujitsu SPARC Enterprise M4000 User Manual page 135

3. Confirm the SNMPv3 trap settings.
XSCF> showsnmp
Agent Status:
Agent Port:
System Location:
System Contact:
System Description: DataBaseServer
Trap Hosts:
Hostname Port
-------- ----
host3 162
host1 62
host2 1162
SNMP V1/V2c:
Status: Enabled
Community String: public
Enabled MIB Modules:
SP MIB
FM MIB
Disabling Traps to the Target Host of SNMPv3
Command operation
■
1. Use the showsnmp (8) command to display SNMP settings.
XSCF> showsnmp
2. Use the setsnmp (8) command to disable the trap destination host of the
SNMPv3 target.
XSCF> setsnmp remv3traphost -u yyyyy host3
3. Use the showsnmp (8) command to confirm that the trap destination host has
been disabled.
XSCF> showsnmp
Enabled
161
MainTower21F
musha@jp.fujitsu.com
Type Community String
---- ----------------
v3
v1 public
v2 public
Username Auth Protocol
-------- -------------
n/a yyyyy
n/a
n/a
Chapter 2 Setting Up XSCF
SHA
n/a
n/a
2-79