Fujitsu SPARC Enterprise M4000 User Manual page 186

Changing the DVD Drive/Tape Drive Unit Settings
■
1. Use the cfgdevice (8) command to display DVD drive/tape drive unit
settings.
<Example> Display DVD drive/tape drive unit setting information.
XSCF> cfgdevice -l
Current connection for DVD/DAT:
Expander status
Port No. IOU/SAS-status SAS-status
------------------------------------------------------
0-0
0-2
0-4
0-6
1-0
1-2
1-4
1-6
2-0
2. Use the cfgdevice (8) command to change the DVD drive/tape drive unit
settings.
<Example 1> Specify the IOUA port number 0-0 for connecting.
XSCF> cfgdevice –c attach –p 0-0
Are you sure you want to attach the device [y|n] :y
Completed.( Reservation )
<Example 2> Specify the IOUA port number 0-0 for disconnection.
XSCF> cfgdevice –c detach –p 0-0
Are you sure you want to detach the device [y|n] :y
Completed.
3. Use the cfgdevice (8) command to display DVD drive/tape drive unit
settings. Confirm the enabling/disabling the specified IOUA number.
2-130 SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
Command operation
Main chassis:
Expansion chassis: port 8-0
enable up
disable down
disable down
disable down
disable down
disable down
disable down
disable down
disable down
port 0-2
enable up
enable up
enable up
enable up
enable up
enable up
enable up
enable up
enable up