Fujitsu SPARC Enterprise M4000 User Manual page 88

Adding or Deleting a User Account and Specifying a Password
■
1. Use the showuser (8) command to display all of the user account information.
(See the description of the password policy in
XSCF> showuser -l
User Name:
UID:
Status:
Minimum:
Maximum:
Warning:
Inactive:
Last Change:
Password Expires:
Password Inactive: Never
Account Expires:
Privileges:
2. Use the adduser (8) command to add a user account.
<Example 1> Specify a user account name.
XSCF> adduser jsmith
<Example 2> Specify a UID for a user account.
XSCF> adduser –u 359 jsmith
If the XSCF is configured to use Lightweight Directory Access Protocol (LDAP)
for user account data, the user name and UID (if specified) must not already be
in use, either locally or in LDAP.
Note – You cannot use the following user account names, as they are reserved for
system use: root, bin, daemon, adm, operator, nobody, sshd, rpc, rpcuser, ldap,
apache, ntp, admin, or default.
2-32 SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
Command operation
user001
101
Enabled
0
99999
7
-1
Jul 11, 2006
Never
Never
platadm
.)
TABLE 2-4