Table 9-11 Time Settings; Table 9-12 Ssh/Telnet Settings - Fujitsu SPARC Enterprise M4000 User Manual

TABLE 9-11
Menu tree.
Time Settings
TABLE 9-11
Function
System time display and setting
NTP server display and configuration
TABLE 9-12
[SSH/Telnet] in the Menu tree.
SSH/telnet Settings
TABLE 9-12
Function
SSH Enabling and disabling
telnet Enabling and disabling
Note – The host key generation, the user public key registration/deletion, and the
timeout period setting for XSCF Shell are not supported by XSCF Web. Set these
functions by using XSCF Shell.
lists the functions for setting the XSCF time. Select [Settings]-[Time] in the
Remarks
Displays and sets the current system time.
This function is equivalent to the applynetwork
(8) and rebootxscf (8) commands.
After setting, the XSCF is reset
Displays and sets the time zone and Daylight
Saving Time.
These function are equivalent to the showntp (8)
and setntp (8) commands. Reset XSCF to
complete the settings.
lists the functions for setting the SSH/telnet. Select [Settings]-
Remarks
Displays and sets the enabling/disabling the SSH.
These function are equivalent to the showssh (8)
and setssh (8) commands.
After enabling SSH, the XSCF reset is required.
Displays and sets the enabling/disabling of telnet.
These function are equivalent to the showtelnet
(8) and settelnet (8) commands.
After disabling telnet, XSCF reset is required.
Chapter 9 How to Use the XSCF Web 9-17