Fujitsu SPARC Enterprise M4000 User Manual page 142

3. Check the SMTP server setting information.
XSCF> showsmtp
Mail Server: 192.1.4.5
Port: 25
Authentication Mechanism : pop
Reply Address: yyyy@example.com
Enabling or Disabling the Mail Report Function and Specifying the
Recipient Address Used for Notification
■
1. Set the SMTP server as described in
and Reply Address of the SMTP
command to display mail report setting information.
XSCF> showemailreport
E-Mail Reporting: disabled
2. Use the setemailreport (8) command to set mail report information.
<Example> Enabling the mail report function and specifying a reply
addresses
XSCF> setemailreport
Enable E-Mail Reporting? [no]: yes
E-mail Recipient Address []: xxxxx@example.com
Do you want to send a test mail now [no]?: yes
... Sending test mail to 'xxxxx@example.com'
3. Use the showemailreport (8) command to confirm mail report setting
information.
XSCF> showemailreport
E-Mail Reporting: enabled
Recipient Address: xxxxx@example.com
4. Confirm the test mail by checking if an email with the subject "Test Mail" was
received.
2-86 SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
User Name: usr001
Password: ********
Command operation
Specifying the Host Name, Port Number,
Server. Use the showemailreport (8)