Fujitsu SPARC Enterprise M4000 User Manual page 242

XSCF Commands (Continued)
TABLE 5-1
Command
showpowerupdelay
setshutdowndelay
showshutdowndelay
setdualpowerfeed
showdualpowerfeed
setlocator
showlocator
switchscf
ioxadm
clockboard
setdomparam
getflashimage
flashupdate
version
prtfru
snapshot
showmonitorlog
showlogs
fmadm
fmdump
fmstat
unlockmaintenance
rebootxscf
who
man
exit
5-6 SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
Description
Displays the warm-up time and the air-conditioning wait time settings.
Sets the UPS shutdown delay time at power failure.
Displays the UPS shutdown delay time at power failure.
Sets the dual power feed.
Displays the dual power feed.
Enables or disables the CHECK LED blinking.
Displays the LED status.
Switches the XSCF Unit state (Active/Standby).
Configures the External I/O Expansion Unit (IOBOX).
Displays the External I/O Expansion Unit settings.
Sets/Displays the number of clock unit (CLKU) used when the next platform is
powered on.
Rewrites the OpenBoot PROM environment variable that is compulsory.
Gets the firmware update program.
Updates the firmware program.
Displays the comprehensive firmware (XCP) version.
Displays the XSCF firmware version.
Displays the OpenBoot PROM firmware version.
Displays the FRU-ROM data.
Saves log information to the specified destination.
Displays the XSCF monitoring messages on console in real time.
Displays an error log, power log, event log, console log, panic log, IPL log,
temperature/humidity log, and monitoring message log.
Monitors or controls the Fault Management Diagnosis Engines (FMDE).
Dumps the fault event log containing FM diagnosis results.
Displays the FMDE status.
Forcibly release the locked status of the XSCF.
Resets the XSCF.
Displays users who login to the XSCF.
Displays the man page of the specified command.
Ends the XSCF Shell.