Fujitsu SPARC Enterprise M4000 User Manual page 64

Enter passphrase for key '/home/nana/.ssh/id_rsa' :xxxxxxxx
Warning: No xauth data; using fake authentication data for X11
forwarding.
Last login: Fri Sep 1 10:19:37 2006 from client
9. Configure the mail settings.
• Display mail notification settings, and
configure and test mail notification.
10. Configure the LDAP settings.
Configure XSCF as an LDAP client (Note).
■
• Display and set LDAP client information.
Note – Lightweight Directory Access Protocol (LDAP): Protocol used to access
directories and databases in TCP/IP networks. Before using an LDAP server,
download a certificate, create a public key, and perform user registration in the
applicable directory in the user environment. This manual does not provide details
on LDAP, so see the available LDAP manuals.
11. Configure the user account settings.
• Add or delete a user account.
• Change a user account password.
• Display user account information.
• Enable or disable a user account.
• Specify a user privilege.
2-8 SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
showsmtp(8), setsmtp(8),
showemailreport(8),
setemailreport(8)
(See Section 2.2.10, "Mail
Administration" on page
showldap(8), setldap(8)
(See Section 2.2.3, "LDAP Administration"
on page 2-35)
adduser(8), deleteuser(8),
password(8),
showuser(8),
enableuser(8), disableuser(8),
setprivileges(8)
(See Section 2.2.2, "User Account
Administration" on page
2-84)
2-29)