Fujitsu SPARC Enterprise M4000 User Manual page 109

After the XSCF reset, the XSCF session is disconnected. Please log in again to the
■
XSCF.
Specifying the Timeout Period of SSH/Telnet
Command operation
■
1. Use the showlogout (8) command to display the timeout period.
XSCF> showautologout
30min
2. Use the setautologout (8) command to set the timeout period.
<Example 1> Specify 255 (minutes) for the timeout period.
XSCF> setautologout -s 255
255min
The set timeout period becomes effective at the next login.
Installing and Uninstalling an SSH User Public Key
Command operation
■
1. Use the showssh (8) command to display the user public key.
<Example> The user key is not set.
XSCF> showssh -c pubkey
XSCF>
2. Generate the user private key and the user public key for a created XSCF user
account with your client software. See the manual for your client software for
procedures to create the user public key and to set the passphrase. We
recommend that the passphrase be set.
3. Use the setssh (8) command with option for installing user public key. Then,
copy and paste the user public key, which was made in
display. After pressing the Enter key, press the Ctrl-D key to complete the
installation.
Step 2, on the window
Chapter 2 Setting Up XSCF 2-53