Domain Power Off - Fujitsu SPARC Enterprise M4000 User Manual

2. Use the poweron (8) command to turn on power to the specified domain.
<Example 1>
XSCF> poweron -d 0
DomainIDs to power on:00
Continue? [y|n] :y
00 :Powering on
*Note*
This command only issues the instruction to power-on.
The result of the instruction can be checked by the
"showlogs power".
<Example 2>
XSCF> poweron -d 0
DomainIDs to power on:00
Continue? [y|n] :n
XSCF>
4.4.4

Domain Power Off

■
1. Use the showdomainstatus (8) command to check the power status of all
domains.
XSCF> showdomainstatus -a
DID
00
01
02
03
4-12 SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
Turn on power to the specified domain.
Cancel domain power on in progress.
Command operation
Domain Status
Running
Running
Running
Powered Off