Fujitsu SPARC Enterprise M4000 User Manual page 136
Fujitsu server user's guide
Hide thumbs
Also See for SPARC Enterprise M4000:
- Reference manual (444 pages) ,
- Service manual (308 pages) ,
- Features manual (148 pages)
Table of Contents
Advertisement
Enabling/Disabling the SNMPv1 and SNMPv2c Communication
■
1.
Use the showsnmp (8) command to display SNMP settings.
XSCF> showsnmp
2. Use the setsnmp (8) command to enable the SNMPv2c agent.
<Example 1> Enable SNMPv1 and SNMPv2c
XSCF> setsnmp enablev1v2c public
<Example 2> Disable SNMPv1 and SNMPv2c
XSCF> setsnmp disablev1v2c
3. Use the setsnmp (8) command to enable the SNMP agent.
XSCF> setsnmp enable
4. Use the setsnmp (8) command to confirm enabling/disabling of the SNMP.
XSCF> showsnmp
Setting the SNMPv1 and SNMPv2c Trap
■
1.
Use the showsnmp (8) command to display the SNMP settings.
XSCF> showsnmp
2. Use the setsnmp (8) command to set the SNMPv1 or SNMPv2c trap.
<Example>
XSCF> setsnmp addtraphost -t v2 -s public host2
3. Confirm the SNMPv1 and SNMPv2c trap settings.
XSCF> showsnmp
2-80
SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
Command operation
Command operation
Specifying the type for SNMPv2c.
Advertisement
Table of Contents
Troubleshooting
