Fujitsu SPARC Enterprise M4000 User Manual page 60

2. Set the password policy.
• Display and set a password policy.
(This table includes the example of setting items and command used. It is similar
thereafter.)
3. Create an XSCF user account, password and privileges.
Create at least one user account with the user privileges of platadm and useradm:
■
(Note)
XSCF> adduser yyyy (Note)
XSCF> password yyyy
XSCF> setprivileges xxxxxx
(See
(The screen is an operating procedure image.)
Note – In preparation for maintenance work, please create an account for a field
engineer (FE) with the privilege of fieldeng during the initial set up.
The default user account is publicly available information. When installation is
completed, create an appropriate user account for the user environment and log in
again with the new user account. For details on the user privileges, see the
Administration Guide.
Note – When you add the user account, use the showuser (8) command with -l
option to confirm that there is no illegal user account in the user account list.
2-4 SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
Section 2.2.2, "User Account Administration" on page
showpasswordpolicy(8)
setpasswordpolicy(8)
(See Section 2.2.2, "User Account
Administration" on page
2-29)
2-29)