Table 9-23 Firmware Updating - Fujitsu SPARC Enterprise M4000 User Manual

Utility
The Pages of Utility include remote maintenance service, firmware update, XSCF
reset, and XSCF switch (high-end systems only).
Note – This document does not provide details on the function of the remote
maintenance service. For details on setting and using the remote maintenance
service, see the manuals describing the remote maintenance service listed in
Enterprise Mx000 Servers Documentation" on page
TABLE 9-23
Update] in the Menu tree.
Firmware Updating
TABLE 9-23
Function
XCP version display
XSCF/OpenBoot PROM version display
XCP importing
Firmware update
Version matching (high-end system only)
To reset the XSCF, select [Utility]-[Reboot XSCF] in the menu tree. This function is
equivalent to the rebootxcf (8) command.
To switch the XSCF, select [Utility]-[Switch Over] in the menu tree. This function is
equivalent to the switchscf (8) command.
9-24 SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
lists the functions for the firmware update. Select [Utility]-[Firmware
Remarks
Displays the XCP version.
This function is equivalent to the version (8)
command.
Displays the XSCF firmware and the OpenBoot
PROM firmware versions.
This function is equivalent to the version (8)
command.
Import the XCP file into the server.
This function is equivalent to the getflashimage
(8) command.
Update the firmwares of XCP.
This function is equivalent to the flashupdate (8)
command.
Match the firmware versions of the two XSCF
Units. This is done when the XSCF Unit is replaced.
This function is equivalent to the flashupdate (8)
command.
xxii.
"SPARC