Connecting To Xscf Using Ssh Via The Lan Port - Fujitsu SPARC Enterprise M4000 User Manual

d. The XSCF Shell can now be used.
Connecting the domain console (OS console)
■
a. If the domain is powered off, use the poweron (8) command for the domain
b. Follow
c. Perform the console (8) command.
d. Confirm that the RW console or RO console window is displayed.
3.1.5

Connecting to XSCF Using SSH via the LAN Port

The procedure described below assumes that SSH is enabled in the SSH/telnet
settings of XSCF, as described in
the server and a LAN and the connection between a PC and workstation, see the
Installation Guide for your server.
The following is the procedure for connecting to XSCF using SSH via the XSCF-LAN
port.
1. Confirm that a LAN cable is inserted into the XSCF-LAN port connector on the
front of the XSCF Unit, or confirm that the PC and workstation to be used are
correctly connected.
2. On the PC or workstation to be used, use one of the following procedures:
■
a. To establish an SSH connection, start an SSH client and specify the IP
b. Enter the ID and password to start the XSCF Shell.
c. Confirm that the XSCF Shell prompt (XSCF>) is displayed.
d. The XSCF Shell can now be used.
Note – To start up the SSH client, see your SSH manual. For details on login, see
Chapter
■
a. If the domain is powered off, use the poweron (8) command for the domain
3-8 SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
on the XSCF Shell terminal and turn it on to start the OS.
Step a to Step d
Connecting the XSCF Shell terminal
address of XSCF. In the systems with redundant XSCF Units, specify the IP
address of active XSCF.
5.
Connecting the domain console (OS console)
on the XSCF Shell terminal and turn it on to start the OS.
in the above "Connecting the XSCF Shell
Chapter 2. For details on cable connections between
terminal."