Specifying A Time Zone - Fujitsu SPARC Enterprise M4000 User Manual

Setting Time and Date (Continued)
TABLE 2-7
Item Description
NTP server Configures an NTP server for XSCF
network. (In this case, XSCF is an NTP
client.)
Specify the IP address or host name of an
NTP server.
You can synchronize with up to three NTP
servers.
Stratum Specifies a stratum service for XSCF.
value
You can specify an integer from 1 to 15.
Reset time Resets the time subtraction between the
subtraction XSCF and each domain, which is stored in
XSCF.
As a result, the time of each domain will be
set to the same time as the XSCF after
startup.

Specifying a Time Zone

■
1. Use the showtimezone (8) command to display the time zone.
XSCF> showtimezone -c tz
America/Chicago
2-42 SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
Command operation
Shell Command Remarks
No default setting has been
setntp
specified.
If the same IP address as
DSCP is set, an error will
occur.
The default stratum value
setntp
is 5.
The settings can be enabled
resetdateoffset
when all of the domains are
powered off.