Table 1-6 User Privilege Names And Descriptions - Fujitsu SPARC Enterprise M4000 User Manual

For example, to set up a domain administrator, the user privilege for the domain is
specified. Moreover, you can provide system monitoring privileges, for instance,
without system operation privileges. You can also limit privileges to specific
domains.
TABLE 1-6
User Privilege Names and Descriptions
TABLE 1-6
User privilege
domainop@n
domainmgr@n
domainadm@n
platop
platadm
useradm
lists user privilege names and outlines the user privileges.
Outline
Reference of the status of any
part of one entire domain_n
Power supply operations and
reference of the status of only
one domain_n
Control of only one
domain_n
Reference of the status of any
part of the entire system
Control of the entire system
User account control
Description of Defined Contents
• Can refer to the status of any hardware mounted
in a domain_n.
• Can refer to the status of any part of a domain_n.
• Can refer to the information of all system boards
mounted.
• Can power on, power off, and reboot a domain_n.
• Can refer to the status of any hardware mounted
in a domain_n.
• Can refer to the status of any part of a domain_n.
• Can refer to the information of all system boards
mounted.
• Can operate all hardware mounted in a domain_n.
• Can refer to the status of any hardware mounted
in a domain_n.
• Can operate all of a domain.
• Can refer to the status of any part of a domain_n.
• Can refer to the information of all system boards
mounted.
• Can refer to the status of any part of the entire
server but cannot change it.
• Can operate all hardware in the system.
• Can configure all XSCF settings except the
useradm and auditadm privilege settings.
• Can add and delete hardware in a domain.
• Can do the power operation of a domain.
• Can refer to the status of any part of the entire
server.
• Can create, delete, invalidate, and validate user
accounts.
• Can change user passwords and password
profiles.
• Can change user privileges.
Chapter 1 XSCF Overview 1-21