Figure 3-2 Example Of Terminal Software Settings - Fujitsu SPARC Enterprise M4000 User Manual

FIGURE 3-2
Example of Terminal Software Settings
FIGURE 3-2
Note – Please increase the delay, when you cannot connect.
3. On the PC or workstation to be used, use one of the following procedures:
Connecting the XSCF Shell terminal
■
a. Establish a connection via the serial port to use the XSCF Shell terminal.
b. Enter an ID and password to start the XSCF Shell.
c. Confirm that the XSCF Shell prompt (XSCF>) is displayed.
shows an example with settings.
Chapter 3 Connecting to the XSCF and the Server 3-7