Fujitsu SPARC Enterprise M4000 User Manual page 125

Log Archiving Administration (Continued)
TABLE 2-15
Item Description
Password Sets a password used for ssh login to the
archive host.
Host public Sets a public key used in server authentication
key for the archive host.
The public key is specified in any of the
following ways:
• Not specified
• Specifying a key by downloading it from the
archive host
• Using text to specify a public key for the
archive host
Capacity Sets limits for the space consumed by archives.
There are two limits, one for each category of
logs:
• Audit log
• Other logs
Note – For the types of logs that can be saved, see
Note – When you set neither a defined value nor a value outside the specified
range, an error is displayed. In this event, no setting is made and the process is
terminated.
Shell Command Remarks
The password is used for
setarchiving
the ssh login.
• To specify a public key,
setarchiving
use RSA. An MD5 key
is displayed for a
fingerprint.
• If a public key is set but
not used for this
authentication, the
public key is deleted.
Specify integer values in
setarchiving
units of megabytes for the
capacity in order,
beginning with the audit
log and then other logs
(Note 1).
The ranges for this setting
are as follows (Note 2):
• Audit log:
0 or unlimited,
500-50000
• Other logs:
500-50000
Chapter 8.
Chapter 2 Setting Up XSCF 2-69