Dell PowerConnect B-RX Configuration Manual page 1448
Bigiron rx series configuration guide v02.8.00
Hide thumbs
Also See for PowerConnect B-RX:
- Configuration manual (1436 pages) ,
- Getting started manual (32 pages) ,
- Installation manual (240 pages)
Table of Contents
Advertisement
E
Redundant management module
Commands
attrib [slot1 | slot2] ro | rw <file-name>
delete | rm [slot1 | slot2] [<directory>] [<file-name>]
undelete
append [<source-file-system> <dest-file-system>]
[/<source-dir-path>/]<source-file-name>
[/<dest-dir-path>/]<dest-file-name>
copy <from-card> <to-card>
[/<from-dir-path>/]<from-name>
[/<to-dir-path>/][<to-name>]
copy slot1 | slot2 flash [/<from-dir-path>/]<from-name>
monitor | primary | secondary
copy slot1 | slot2 image <file-name>
copy flash slot1 | slot2 <source-name> monitor | primary
| secondary | startup-config [<dest-name>]
copy flash flash monitor standby
copy flash flash primary [standby]
copy flash flash secondary [standby]
copy flash lp <source-file> <dest-file> <slot-number> | all
copy flash tftp <ip-addr> <dest-file-name> primary |
secondary
copy slot1 | slot2 tftp <ip-addr>
[/<from-dir-path>/]<source-file> [<dest-file>]
copy tftp slot1 | slot2 <ip-addr>
[/<from-dir-path>/]<source-file> <path-name> | monitor
| primary | secondary
copy slot1 | slot2 startup-config
[/<from-dir-path>/]<file-name>
copy startup-config slot1 | slot2
[/<to-dir-path>/]<to-name>
copy startup-config tftp <ip-addr>
[/<to-dir-path>]<to-name>
copy tftp startup-config <ip-addr>
[/<from-dir-path>]<from-name>
copy running-config slot1 | slot2
[/<to-dir-path>/]<to-name>
copy slot1 | slot2 running-config
[/<from-dir-path>/]<from-name>
1372
See ...
"Changing the read-write attribute of a file"
page 48
"Deleting a file"
on page 49
"Recovering ("undeleting") a file"
"Appending a file to another file"
"Copying files using the copy command"
"Copying files between a flash card and flash
memory"
on page 52
"Copying software image from a flash card to the
flash memory"
on page 52
"Copying files between a flash card and a TFTP
server"
on page 54
"Copying software images between active and
standby management modules"
"Copying software images between active and
standby management modules"
"Copying software images between active and
standby management modules"
"Copying files from a management module to an
interface module"
on page 53
"Copying BigIron RX Series Multi-Service IronWare
images from flash memory to a TFTP server"
page 53
"Copying files between a flash card and a TFTP
server"
on page 54
"Copying files between a flash card and a TFTP
server"
on page 54
"Copying the startup-config file between a flash card
and flash memory"
on page 54
"Copying the startup-config file between a flash card
and flash memory"
on page 54
"Copying the startup-config file between flash
memory and a TFTP server"
on page 55
"Copying the startup-config file between flash
memory and a TFTP server"
on page 55
"Copying the running-config to a flash card or a TFTP
server"
on page 55
"Loading a running-config from a flash card or a TFTP
server"
on page 55
BigIron RX Series Configuration Guide
on
on page 50
on page 51
on page 51
on page 53
on page 53
on page 53
on
53-1002253-01
Advertisement
Table of Contents
