Subnet Management - Qlogic 12000 Series Reference Manual

Subnet Management

smControl
Starts and stops the embedded subnet manager.
Syntax:
smControl start | stop | restart | status
Options:
Start
Start the SM.
Stop
Stop the SM.
restart
Restarts the SM.
status
Prints out the SM Status.
Sample Output:
-> smControl start
Starting the SM...
smConfig
Configure startup parameters of the embedded subnet manager.
Syntax:
smConfig [query] [startAtBoot yes|no] [startOnSlaveCmu yes|no]
Options:
query
Display present settings, no change
startAtBoot
Start the subnet manager at chassis boot
startOnSlaveCmu
Start subnet manager on the slave CMU
Sample Output 1:
-> smConfig
Start at boot? [Y]
Start on slave CMU? [N]
D000103-000 E
Switch Command Line Interface
Groups and Commands
1-59