Qlogic 12000 Series Reference Manual page 32

Switch Command Line Interface
Groups and Commands
sessionTimeoutEnable
Enable the idle timeout for the CLI session.
Syntax:
sessionTimeoutEnable
Options:
None.
Sample Output:
-> sessionTimeoutEnable
Enabled session idle timeout.
NOTES: Enables the idle timeout for the current CLI session. This value does not
persist across instances of the session (i.e., with each log on, it defaults back to the
system default value).
loginMsgGet
Displays the CLI login message for this device.
Syntax:
loginMsgGet
Options:
None.
Sample Output:
-> loginMsgGet
Welcome message: Be certain to logout when you are finished using the
CLI.
NOTES: Displays the current login welcome message for the CLI. This message
can be customized with the loginMsgSet command.
loginMsgSet
Set the CLI login message for this device.
Syntax:
loginMsgSet [message] [-clear]
1-24 D000103-000 E