Qlogic 12000 Series Reference Manual page 19

Sample Output:
-> killCliSession
must supply session number
NOTES: This command logs out remote sessions. Use 'who' to obtain the list of
active sessions.
who
Displays currently active CLI sessions.
Syntax:
who
Options:
None.
Sample Output:
user role
---------------------------------------------------------------------------------------------------
admin admin
NOTES: Displays a list of currently active CLI sessions. Note that a session can
be 'active', but no user information available (in most cases, this indicates the
session is waiting for the user to enter login information).
For each session the following information is displayed:
broadcast
Write a message to all active CLI sessions
Syntax:
broadcast msg
D000103-000 E
index logged in
0 13:19:03 07/11/2008
user: username of the logged in user
role: security role of the user
index: internal session index
logged in: timestamp of when the user logged in
last cmd: timestamp of the users last command
type: method used to connect to the system
ip address: ip address of the user (if applicable)
Switch Command Line Interface
Groups and Commands
last cmd type
09:41:20 07/11/2008 serial
ip address
0.0.0.0
1-11